Industry News

Faucet installation method part 2
05-11-2018
3. Thermostatic faucet installation Before installing the thermostatic faucet, please check if the water pipe is left hot and cold right. Remember not to install the hot and cold water pipes incorrectly, so as to prevent the faucet from working prope...
Regarding the water leakage repair at the faucet joint
12-11-2018
Leakage treatment In normal life, sometimes you will find that the faucet will drip after tightening, and it will not stop from the outlet of the faucet or the joint, which will not only cause a lot of waste, but sometimes its sound will also cause s...
Inlet valve
19-11-2018
Inlet valve In the water turbine system of the turbine, according to the operation and maintenance of the hydropower station, corresponding gates or valves are installed at different positions, and the valve in front of the turbine volute is usually ...
The role of the inlet valve
26-11-2018
As the accident valve and maintenance valve, the inlet valve usually only has two working states: full opening or full closing, which cannot be used to regulate the flow. The main valve is not allowed to open in the case of moving water, its role is:...
Inlet valve operation mode
03-12-2018
Operation method In medium and small hydropower stations, the inlet valve operates in three modes: manual operation, electric operation and hydraulic operation. The general micro unit inlet valve is manually operated. The inlet valve of the small uni...

News